Custom transducer/platform questionnaire

1)    Select the required degrees of freedom (DOF). See the figure to the right.

Fx
Fy
Fz
Mx
My
Mz

2)    Select a representative physical form from the figures below or enter a description of the transducers overall package in the space provided to the right.

Physical description:

Rectangular

Cylindrical

Platform

Flanged

3)    Enter the x,y and z dimensions in the space to the right. Refer to the figure on the top of the page for the coordinate axes. If your transducer is cylindrical then enter the diameter (item D). Make sure you indicate the units of measure by selecting inches or centimeters.

X :
Y :
Z :
D :

in cm

4)    Enter the x,y and z forces (maximum) in the space to the right. Refer to the figure on the top of the page for the coordinate axes. Make sure you indicate the units of force by selecting pounds or Newtons.

Fx :
Fy :
Fz :

lb N

5)    Enter the x,y and z moments (maximum) in the space to the right. Refer to the figure on the top of the page for the coordinate axes. Make sure you indicate the units of torque by selecting in-pounds or Newton-meters. For assistance click here <Moment Calculations>

Mx :
My :
Mz :

in-lb N-m

6)    Describe your mounting requirements. Bolt circle, bolt pattern, flanges, inserts etc. Include the number of and size of holes, thread or insert requirements and any additional information.

Top mounting details Configuration: Number of bolts: Bolt size: Thread: Bottom mounting details Configuration: Number of bolts: Bolt size: Thread:

7)    Describe your environmental requirements. Include information such as: water or fluid immersion, sealed, pressure compensated, high temperature operation, low temperature operation.

Special environmental considerations:

8)    Please provide a brief description of your application, and any particular mechanical requirements such as stiffness, natural frequency or sensitivity requirements which you think might affect the transducer design.

Application description:

10) Please enter your contact information below.

First Name:		*
Last Name:		*
Company Name:
Address 1:
Address 2:
Address 3:
Town/City:
State/Province:
Postal Zone/Zip Code:
Country:
E-Mail:		*
Would you like to receive product updates and technical info from AMTI via E-mail in the future ?	Yes
Would you like to receive product updates and technical info from AMTI via mail in the future ?	Yes

AMTI’s Privacy Notice

AMTI will not use the information provided in above fields for any purpose other then to contact you to supply the requested information. If you check either of the above two check boxes we will include you on our E-mail list and or mailing list and will supply you with product information, application notes, and technical notes from time to time.